SPC Performance Rear Camber Cam Bolts - Infiniti G35 / Nissan 350Z / Nissan 370Z

Description

By replacing the stock alignment washers on the upper control arms, lower control arms, or other suspension locations, caster and camber can be adjusted by turning the cam nuts to obtain the proper readings. These cam kits give you the full range of caster and camber adjustment and once installed can make alignment changes for the life of the vehicle. *CAM PLATES* For vehicles which have very little clearance to adjust the camber and caster with the OE adjusting cams. The unique design saves time by installing onto the OE bolt � no need to replace the bolt � and allows for quick future adjustments.

Rear Adjustment range: Camber 3.00 degree Toe 3.00 degree

NOTE: Two kits are required to complete installation if you are using stock arms. (Camber arm and spring perch location)
Only one kit is required if you already have adjustable camber arms other than SPC. (Spring perch location only)